FInance It! Get 0% Ebike Financing Now
Skip to content
Supermoto Conversion Kits
STM Slipper Clutches & Billet Parts
Rizoma Parts - Rizoma Store
Wolfman Duffle Bags
Wolfman Enduro Bags
Wolfman Expedition Bags
Wolfman Luggage Accessories
Wolfman Luggage Racks
Wolfman Rolie Bags
Wolfman Saddle Bags
Wolfman Tail Bags
Wolfman Tank Bags
CUBE Electric Bikes
CUBE Full Suspension Mountain Ebikes
CUBE Hard Tail Mountain & Cross Ebikes
CUBE Trekking, Touring, Commuting Ebikes
CUBE 2018 Electric Bikes
CUBE ELECTRIC BIKE SALE
ELBY Electric Bicycles
Felt Electric Bikes
FUJI Electric Bikes
Fuji Not Electric Bikes
Haibike Electric Bikes
Haibike Full Suspension Mountain Ebikes
Haibike Hard Tail Mountain eBikes
Haibike Road & Trekking Ebikes
Haibike FAT Mountain Ebikes
Haibike 2018 Models
Haibike Clearance ebikes
iZip Electric Bikes
Moustache Electric Bikes
Raleigh Electric Bikes
Salsa Not Electric Bikes
TRIO Cargo e-Bikes
Yuba Electric Bikes
Bionx Electric Bike Kits
BOSCH Electric Bike System Parts
E-Bike Battery Chargers
E-bike Commuter Kits
SUPERNOVA Brand Lights
E-Bike Specific Tires
SHIMANO Steps Ebike Parts
UP CLOSE: SRAM EX-1 Drive System
Yamaha Electric Bike System Parts
Felt Bicycle Parts
FELT BMX Parts
Felt Cruiser Parts
Felt Road Bike Parts
Felt Triathlon Parts
Felt E-bike Parts
Yuba Bicycle Parts
Suter Slipper Clutch TM 450-530 09-11
0% Financing Available
Usually Ships in 3 to 5 Days
In Supermotard the SuterClutch performs the same task as in road racing bikes: No more rear wheel hopping, easier controllable slides and a smoother, more precise response while through the reduced engine braking an optimal racing line can be achieved through corners. Almost any top Supermoto Racer uses a slipper clutch.
Motocross-Riders will benefit mainly from the reduced engine braking. With the SuterClutch they experience a much smoother braking phase over rough terrain resulting in better lap times. For the same reason it is simply a must for 2-stroke pilots changing to a 4-stroke bike.
Enduro-Cracks appreciate the possibility by the SuterClutch to decelerate hard even in the most demanding situations and on rough ground. This slipper clutch ensures that the rear wheel turns evenly over different soil conditions and keeps the line.
Easiest Installation Special tools for installation no longer needed
Fully adjustable Anti-Hopping effect
Best control under braking
This high quality SuterClutch precision machined from T-6 aircraft quality aluminum impresses through its fine responsiveness, the efficient inner lubrication and its easy installation. The special color of this clutch results from the hard anodized Teflon coating which considerably minimizes the wear on the friction surfaces.
Included with delivery are all relevant parts for installation and four Anti-hopping springs. Through its ingenious design, this clutch can be fitted without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance. The Anti-hopping effect can be adjusted for every riding style; for tuned models there is a range of harder main springs available to order.
What is a Slipper Clutch?
Slipper clutches (or anti-hopping clutches) are specialized clutches developed for racing motorcycles to reduce the effects of engine braking when riders decelerate hard as they enter corners. A slipper clutch allows to swiftly shift down without experiencing the otherwise typical stamping of the rear wheel (short blocking).
On a motorcycle without a slipper clutch when shifting down the "entire" engine brake horsepower is transmitted back along the drive chain to the rear wheel. But because this power can only be transmitted to some extend over the tire to the ground, in case of fast downshifting the rear wheel slips and starts to hop, chatter or lose traction. This happens especially when a rider brakes hard before entering a corner whereas the rear wheel is additionally unloaded by the shifting of the whole weight.
This is where the slipper clutch comes into action: the excess power is being "eliminated" by a controlled freewheeling. In other words: a slipper clutch is designed to partially disengage or slip when the rear wheel would block while trying to drive the engine faster than it would normally. This way the tire always brings the maximal possible braking force to the ground while still rotating. This results in a smoother, more precise response and an improved stability and steering behaviour during braking. Furthermore the gearing and the drive chain sustain less stress while the risk of of over-revving the engine during downshifts is minimized.
Last but not least slipper clutches can also prevent a catastrophic rear wheel lockup in case of engine seizure or transmission failure. Generally, the amount of force needed to disengage the clutch is adjustable to suit the application.
Originally the slipper clutch was developed for street racing bikes but more and more it is used in the offroad sector. The smoother braking phase with offroad bikes, especially down hill and on heavy bumps, also results there in faster lap times. Hence in racing – On- and Off-road – nowadays a slipper clutch is a must for any pro rider. But also for the ambitious amateur rider a slipper clutch is a great device, increasing the riding safety on public roads
What are the advantages of a SuterClutch over a original slipper clutch?
There are some slipper clutches on the market and an increasing number of motorcycle manufacturers original construction this power part, however, there exist big differences between these clutches and the SuterClutch:
One is a novel, almost revolutionary mechanism in the operation of the SuterClutch where only the pressure plate is lifted. The inner basket won’t in contrast to the competition not axial by the pressurized clutch package moved, thus it works practically frictionless. The result: A much softer and more precise response in all areas. The clutch self-regulate, in accordance with the load change reactions, the pressure of the clutch discs.
On the other hand, the SuterClutch is milled from T-6 aviation Aluminum and has a special Teflon coating.
SuterClutch Slipper Effect
This provides a wear resistance, which others (and of course cheaper produced) slipper clutches only through greater wall thickness and thus more weight can compensate. Also, the additional parts such as springs, etc. are only fabricated by the best materials.
The new 6-bolts SuterClutch version has an ingenious design, that needs no more special assembly tool! The pressure plate is mounted by 6 screws, making quick work on the clutch possible. The SuterClutch can even be mounted by inexperienced riders in the shortest possible time. And there are no additional costs for special tools, not like by many others competitive products.
Finally, all our clutches are tested by professionals, and according to their impressions improved and developed. A SuterClutch owner receives a clutch, which is exactly designed for the characteristics of the corresponding bike.
Why should I use a slipper clutch?
A slipper clutch offers better running characteristics and smoothness across the entire range.
No more rear wheel hopping, easier controllable slides and a smoother, more precise response (with offroad bikes smoother braking phase, especially down hill and on heavy bumps) result in improved stability during braking, a better steering behaviour and hence faster lap times. In racing – On- und Offroad – nowadays a slipper clutch (especially the SuterClutch) is considered by professional biker around the world as one of the most crucial Powerparts.
My new bike ex-factory already has a slipper clutch in it. I guess I don't need any SuterClutch?
Wrong. Indeed more and more bike manufacturers originally integrate in their motorbikes a slipper clutch but there are substantial differences between such a clutch and a SuterClutch:
On the one hand through a new and revolutionary mechanism only the pressure plate is being lifted. As the inner clutch basket is not moved axially by the plates under power, it is virtually frictionless in operation, unlike competitors’ products. The result is a much smoother, more precise response across the entire range, giving riders improved speed and greater road safety.
On the other hand the SuterClutch is precision machined from T-6 aircraft quality aluminum and comes with a special Teflon-coating. This leads to a wear resistance which other (and of course cheaper produced) slipper clutches can only compensate with bigger wall thicknesses and hence more weight. Of course any other part inside a SuterClutch as springs etc. are being manufactured only out of top-quality materials.
The new 6-Screw SuterClutch version furthermore – through its ingenious design– can be fitted without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance. Therefore the SuterClutch can be installed in no time even by an unexperienced rider. And: no more costs for any special tools as it is the case with many competitors’ product.
Last but not least all our models are being tested by pro riders and improved and refined according to their feedback. Hence as a SuterClutch customer you can be sure to combine long-lasting experience with the newest technology available. You receive a clutch which is designed and adapted to the specific characteristics of the resp. bike.
Can the SuterClutch be adjusted to different riding styles?
Yes, this clutch can be adjusted to the relative track conditions, tire choice, gear ratio, power delivery etc. The factory setting for the anti hopping effect has been determined by professional riders during extensive testing and serves as the basic setting. Changing the small anti hopping spring the anti hopping effect can be optimally adapted to you needs. The stronger the anti-hopping spring is, the harder the engine braking effect will be.
For Motocross we recommend the softest spring with the code XXX. This spring is included in the delivery of all off-road models.
Depending on the clutch additional anti hopping springs are included in the delivery resp. can be ordered separately from our online shop.
My Bike has been tuned to have more power. Can I still install a SuterClutch?
Basically our clutches are designed for the resp. production engine and its power-output and torque progression. However the SuterClutch can of course be used for bikes with more power and torque if you pay attention to following points:
- If a slight increase in power has been shown due to the exchange of the exhaust system or even only of the muffler, our clutch can be installed in the original delivered state. The SuterClutch can transmit this remote additional load without any problems.
- If your engine has been tuned thoroughly and has considerably more power as the standard version, better you get in touch with us. We then can prepare for you an appropriate spring-setup which copes with the additional power delivery you state.
- Generally, the higher the engine power is, the harder must the main spring be.
What about Off-road or Motocross? Is the SuterClutch there of any use?
The SuterClutch works excellent in off-road.
The main advantage is a much smoother braking phase, especially down hill and on heavy bumps resulting in better lap times. As this slipper clutch reduces the engine braking, for 2-stroke pilots who are thinking of moving to a 4-stroke bike the SuterClutch is a must. Enduro riders appreciate the possibility to decelerate hard even in the most demanding situations and on rough ground. This slipper clutch ensures that the rear wheel turns evenly over different soil conditions and keeps the line. The SuterClutch is being used by pro riders in the MX-1 down to the local amateur riders.
Will the SuterClutch fit right in? Is there anything to be payed attention to?
The SuterClutch can be installed in no time even by an unexperienced rider.
The function of the clutch is however directly connected to the plate package thickness. One has therefore to take care to check the measurement of the package according to the enclosed user manual. All installation steps are therein explained clearly and illustrated accordingly. Further you can find in this manual a guide for troubleshooting should something not work as it should.
What special tools do I need for the mounting?
Though an ingenious design the new 6-Screw SuterClutch version can be fitted without any special installation tools! The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
Instead the older SuterClutch versions contain all assembly tools needed. Hence: no more costs for any special tools as it is the case with many competitors’ product.
Is the clutch plate package enclosed in the delivery?
This is not necessary as the SuterClutch uses the original plate package.
Are the clutch plates lining going to wear off faster?
Yes. As the clutch operates a lot more the lining is going to wear off faster. Hence the plates should be controlled more often. Having a softer setup the wear is even a bit higher.
Does the clutch need much maintenance?
No; but if the clutch is being overstrained some maintenance will be necessary. In normal use the wear of the pressure plate is negligible. However if the clutch is used strongly all the time the mechanism and the condition of the plates should be controlled more often.
Do I need to use some special engine oil?
No. Just use the engine oil the manufacturer of your bike recommends. Because of the stronger use of the clutch package through the anti hopping effect you will have however more abrasion and debris in the oil. Therefore when using a slipper clutch the oil has to be changed more often than prescribed by the bike maker.
What benefit do I get from the steel inlays?
The clutch version with the exchangeable steel ramp inserts is mainly intended for race teams. Even in rough constant race use the ball ramps are not going to wear out. Further through the exchangeable inlays (with different ramp angles ranging from 30° to 45°) the anti-hopping effect can be set up even more precisely according to track conditions, tire mixture and rider preference.
The more steep the ball ramp is set up the much softer anti hopping springs can be used.
What's the difference between the circlips and the new 6-Screw clutch version?
The main difference between these models is the way the in which the pressure plate is held in place. As the name describes it, with the Circlip version the pressure plate is fixed with a circlip and with the 6-Bolt version with 6 special M5 bolts. The mechanism for disengaging is however on both models the same.
Advantages of the Circlip Version:
The pressure plate can be swiftly removed & less components are involved.
The circlip version needs a special tool for the spring to be installed (included in delivery).
Advantages of the 6-Bolt Version:
The clutch can be installed without any special installation tool.
The response behavior on the clutch lever is more precise as no circlip clearance has to be compensated and the pressure plate can be build more rigid. Additionally the oil feed on this clutch version has been optimized.
Why do the latest SuterClutches have this grey green color?
Newly diverse SuterClutch models are provided with a novel uniform coating which gives a less colorful appearance but makes them even stronger and more wear resistant. Still the gray green color gives a cool look and gradually all SuterClutch models will get it.
My clutch shows abrasion marks inside the pressure plate. Is that normal?
Correctly installed clutch package
These abrasion marks (not visible from the outside) occur at all SuterClutch models which do not yet have the new grey green coating. This is normal and does not affect the functionality at all as long as the facing has not been grinded in more than 0.2mm. For the material underneath (as in all SuterClutch models) consists of high-end T-6 aircraft quality aluminum which can resist the occurring pressure a long time. However if the pressure plate is worn out more than 0.2mm it should be replaced.
If the clutch package of the Kawasaki KX- und CRF models is not installed in right order
The clutch packages of the Kawasaki KX- und CRF models feature different friction disks. There is a difference between the two outer disks and the inner disks. If you fit those in wrong order, the pressure - and the back plate will wear out very fast. Please make sure that the order of the disks is according to the original bike manual (not as might be seen in the SuterClutch User Manual) when installing.
STM Yamaha YZ/WR 450F Supermoto Slipper Clutch
STM Kawasaki KX 450F Slipper Clutch
Suter Slipper Clutch Honda CRF450r 2013
STM Aprilia SXV Cross / Enduro Slipper Clutch
STM KTM 450 525 560 Slipper Clutch
STM Aprilia SXV Supermoto Slipper Clutch
STM Yamaha YZ/WR 450F Supermoto Slipper Clutch
STM KTM LC8 950 990 Slipper Clutch
Share your knowledge of this product.
Be the first to write a review »
Browse for more products in the same category as this item: