Ready to batt 500? Available now and full of power! This frame or rack mounted 500W battery will fit to any BOSCH powered ebike. Direct replacement for the 400W battery. Adds 20% more range to your Bosch ebike. The new PowerPack 500 offers the same 36V but moves the Capacity from 11Ah to 13.4Ah, thus increasing your range by 22%. Weight goes up from 5.5 lbs to 5.7 lbsWith its increased range, the new PowerPack 500 is the perfect choice for eMountain bikers, athletic bikers, commuters, and anyone who wants to ride longer distances. Due to its unequalled energy density, this lithium-ion battery is exceptionally small and lightweight. Available as a frame or rack battery, PowerPack 500 adds more capacity and performance to the PowerPack series so you can conquer even steep hills and the most rugged trails.Powerful:
500 watt-hours of energy content
An optimized charging process: Fully recharged in ca. 4.5 hours; 50% in < 2 hours
High energy, high power cells: Through their combination of high energy content with high performance, Bosch PowerPacks offer great range and can even conquer steep hills.
Best in class: 40-cell packs with the highest energy density (190 Wh/kg) on the market and the lowest weight and volume. More power with an unchanged size as compared to PowerPack 400.
Ergonomic design and impeccable handling. The handle and mount enables the PowerPacks to be easily inserted and removed. The only thing easier than this is simply charging them directly on the pedelec while still mounted.
All lithium-ion batteries, PowerPacks from Bosch eBike Systems are available in three energy content levels: 300 Wh, 400 Wh and 500 Wh. Each is in turn available as a rack or frame battery. They can be easily inserted and removed, or they can be recharged directly on the eBike. The Battery Management System (BMS) provides the best possible protection against overcharging, undervoltage and short circuiting, while further enhancing the service life of PowerPacks.
The Performance Line truly lives up to its name. It is designed for sportive, powerful cycling both when accelerating in hilly terrain and when cycling in lowland country. With the highest precision, its performance is combined with that of the eBiker, generating sportive support that dominates every terrain and every gear. From flat to steep. From moderate to full power. The inner values are complemented by an equally impressive exterior. Design and ergonomics combine a high level of aesthetics and usability.
The Performance Line brings a mass of energy and momentum to the street, to the dirt road, to the pass, to the single trail. The powerful drive system consists of the Drive Unit Crusie (25 km/h) or Speed (45 km/h), PowerPack 300 or PowerPack 400 and the compact Charger. Intuva Active is the clever eBike control centre.
The strong energy is reflected with the young and sportive design of the anthracite-coloured components – a design awarded with the Red Dot Award for product design. In keeping with its design and performance, a wide range of sports models such as mountain or trekking eBikes can make optimal use of the Performance Line.
In the Performance Line, two Drive Units are available for selection: The Drive Unit Performance Cruise enables sporty assistance up to 25 km/h. The Drive Unit Performance Speed supports up to 45 km/h.
The difference is the technology behind the new modern anthracite-coloured design of the components. The improved drive system with more powerful electronics and a low-vibration motor as well as low volume and weight, convinces the rider. The optimised 3-sensor concept take measurement 1,000 times per second with maximum precision for optimal power tuning and a new, unique riding experience. The optimal balance of performance and range is also a matter of pure enjoyment.
Designed in anthracite-colour in accordance with the Performance Line, the new cycle computer Intuvia Performance presents itself as the control centre of the eBike. . It features simple and intuitive operation trough the separate remote control.
Switching between the five riding modes, plus walk assistance, and look up information such as speed, charging state, distance and much more could not be easier. Even when removed from the ebike, Intuvia remains a useful information tool that makes it possible for you to retrieve all your tour data.
A USB port allows you to charge external hardware such as smartphones and MP3 players. With Intuvia Performance, high-precision distance measurements are possible. The eBiker himself can make a fine adjustment to the wheel circumference at the touch of a button.
The five available riding modes – Turbo, Sport, Tour, Eco and Off – can be easily and conveniently selected via the separate control unit without it being necessary to take one’s hands off the handlebar. Bosch offers the perfect drive mode for every eBike user and riding:
The Bosch eBike System includes five different drive modes — perfect for every eBike user and riding style:
Intuvia Performance in anthracite is the suitable cycle computer specially matched to the line.
The PowerPacks of the Performance Line are lithium-ion batteries with 300 Wh and 400 Wh, respectively. The PowerPack 400 Performance comes in two versions: as a rack or as a frame battery. The PowerPack 300 Performance is available as a frame battery.
The new PowerPacks are batteries with unmatched energy density. The battery management system offers optimal protection against overload, undervoltage, overheating and short circuit, and it also increases the long service life of the PowerPacks.
The new charging device is compact and lightweight. The Charger weighs less than 800 grams, including the cable. The improved charging plug and practical hook-and-loop strip for cable sorting also simplify handling. The new battery charging device is designed without air vents, preventing contamination and making it more robust.
The Powerpack 300 is charged to 50% in 1 hour, the Powerpack 400 in 1.5 hours. For a full charge, the Charger needs 2.5 hours with the PowerPack 300 and 3.5 hours with the PowerPack 400.