Skip to main content

Hardware: Beringer Master Cylinder Recall Notice



PRODUCT CONCERNED :

BRO-10, BRO12 , BRO14, CRO9 , CRO14, BRAKE AND CLUTCH MASTER CYLINDERS WITH BUILT-IN RESERVOIR.

Master Cylinders not equipped with a fluid eyesight are not concerned.

ISSUE :

On some Brake and Clutch Master Cylinders manufactured between November 2006 and March 2007, the fluid level eyesight may fall out and allow the fluid to drain out which could result in a crash and/or serious injury or death. This problem is due to a material defect detected by our Fluid Eyesight supplier.

A replacement Fluid Level Eyesight with sealing o-ring and retaining clip will be sent to you at no charge. Please replace this component immediately.

If you do not feel comfortable performing this task, please send your master cylinder to : BERINGER USA. 4050 Spencer Street, Suite I, Torrance, CA 90503

The Eyesight will be replaced for you free of charge and the Master Cylinder returned to you, freight prepaid.

How to identify the faulty Fluid Level Eyesights :

Made of clear see-through material. (The new Eyesight is white in appearance).

Master Cylinder production date is indicated on the underside of the main body after the part number. Example : BRO12 17.5 05/07

05/07 indicates the fifth week of 2007, i.e. Jan 29 to Feb 2nd 2007.

Production Dates concerned : 44-06 thru 14-07

How to Replace the Fluid Eyesight :

1/ Remove the fluid reservoir cap by loosening and removing the 2 torx screws.

2/ Soak up brake fluid with a clean rag or suck out with a clean seringe.

3/ Pop the retaining clip with a thin blade screw driver

4/ Push out the clear fluid eyesight and o-ring. Clean hole with a dry rag.

5/ Install o-ring on new fluid eyesight

6/ Push new fluid eyesight into the hole and press while inserting the new clip.

8/ Make sure the clip is fully seated at the bottom of the groove in the eyesight

9/ Clean any residue inside the reservoir. Add brake fluid to top of eyesight.

10/ Clean rubber gasket and re-install reservoir cap. Tighten screws.

TEST MASTER CYLINDER AND BLEED IF NECESSARY !

Comments

Popular posts from this blog

Hardware: Supermoto Wheels Explained

Supermoto wheels are a big investment, when you factor that your 2-3 year old dirt bike may have a resale value in dirt form in the $4-5K range, if that. We get calls from guys all the time who say "well, I'm not really racing or nothing, so I'm just looking for the cheapest wheels you have to convert to Supermoto". Well, the real reply there is that there really isn't a cheap way to get into Supermoto unless you're going to go Sportsman about it and ride on knobbies or some type of dual-sport tire. Quality 17-inch supermoto wheels that will last are going to set you back between $800 and $2000 depending on how deep you're going to go at this and whether you want quality and performance or just a good price. Motostrano is a full scale supermoto specialist and we've been involved in Supermoto since it's re-birth in the United States in 2002. We offer complete supermoto wheels made from the finest materials and built by experience wheel builders

Haibike Urban, Race, Superrace Fork Recall

Product recall of all Haibike XDURO Race, Superrace and Urban models  Schweinfurt, 14th February 2017 – Product recall at Haibike: XDURO Race, Superrace and Urban models were sold on the market featuring forks which exhibit rather unstable material. This might result in premature rupture and may ultimately lead to a fork break. This poses an enormous safety and injury risk for every user. Thus, the lower Franconian bicycle manufacturer decided to perform this recall. Affected are the following models of different model years: - Haibike XDURO Urban (model year 2014, 2015) - Haibike XDURO Urban RC (MY 2016) - Haibike XDURO Race (MYs 2014, 2015) - Haibike XDURO Superrace (MYs 2014, 2015) - Haibike XDURO Race S RX (MY 2016) - Haibike XDURO Race S PRO (MY 2016) - Haibike XDURO Urban S RX (MY 2016) - Haibike XDURO Urban S PRO (MY 2016) „The safety of our eBikes and their riders has highest priority for us. Therefore, we perform extensive endurance tests at external testing institutes

Riding the Moustache Samedi 27 2X Tandem Electric Bike

I love riding with my partner and riding by tandem is one of my favorite ways to get around on a Sunday. Touring by tandem is literally twice as fun as riding solo,when you are on a bike with the one you love and the one that loves you. But tandem bikes are rare and excellent electric tandem bikes are even rarer, so I wanted to give you a fresh impression of our ride yesterday on the 2018 MOUSTACHE Samedi 27 X2 tandem . Moustache is a French company, making some of the most innovative ebikes in the world. Their tandem is no exception. This bike comes in two build types, either a smooth tire touring type or a knobby tire off-road type, but the frames, motors and other specs are pretty much the same.  I've ridden tandems for the past few years on road and off road. Yesterday we did a Meet-Up ride with other fellow ebikers in the Sonoma area. Naturally we were the only tandem riders, with others riding solo on their Haibikes, KTM, Giant, Felt and Blix bikes. Out and